Hardware/Fasteners
|
| |
|
|
Self Clinching Fasteners
Global Fasteners has partnered with the highest quality producers of self clinching hardware. We are proud to be able offer these to our customers at substantial savings over domestic producers. We have been able to save our customers time and money on their high production self clinching hardware needs. Most quotes can be obtained in 24-48 hrs., with samples usually available in 2-3wks. Production times vary from 30-45 days depending in run size. Please allow 30 days for overseas shipping. If you are experiencing delivery problems with your current vendor give us a call, chances are we can save you time and money.
If you are interested in brand name Pem products we can provide those to you as well.
1 | 2 | 3
|
|
| Concealed-Head Studs |
 |
Types: ACHC, ACHA, ACFHC, ACFHA
PEM Series: CHC, CHA, CFHC, CFHA
General Information: Installed into a blind milled hole where surface opposite stud must remain unmarred. Thread sizes #4 to #10 and M3 to M6.
Data Sheet
|
|
| |
|
| Studs for Stainless Steel |
 |
Types: AFH4
PEM Series: FH4
General Information: For installation into stainless steel sheets as thin as .040" / 1mm. Thread sizes #4 to #10 and M3 to M5.
Data Sheet
|
|
| |
|
| Self-Clinching Studs |
 |
Types:
AFH,
AFHS,
AFHA,
ATFH,
ATFHS,
AHFH,
AHFHS,
AHFHB,
AFHL,
AFHLS,
AHFE
PEM Series: FH, FHS, FHA, TFH, TFHS, HFH, HFHS, HFHB
General Information: External threads in sheets as thin as .020"/0.51mm. Included are studs, flush-mounted studs, studs for stainless steel and non-threaded alignment pins.
For Data Sheets, click on a type above.
|
|
| |
|
| Flush-Mounted Panel Screws |
 |
Types: APR10, APS10
PEM Series: PR10, PS10
General Information: Captive screws with self-clinching retainers can be flush mounted into sheets as thin as .125"/3.2mm. Thread sized #4 to #10 and M3 to M5.
Data Sheet
|
|
| |
|
| Panel Standoffs |
 |
Types: ASKC
PEM Series: SKC
General Information: Designed so that a P.C.board or component can be quickly slipped into place and then removed by sliding the board sideways and lifting it off.
Data Sheet
|
|
| |
|
| Miniature Fasteners |
 |
Types: AU, AUL, AFE, AFEO, AFEX, AFEXO
PEM Series: U, UL, FE, FEO, FEX, FEXO
General Information: Strong threads in a minimum of space. Available with locking or non-locking threads. Can be installed into sheets as thin as .020"/0.76mm.Thread sizes #0 to 1/4" and M2 to M6.
Data Sheet
|
|
| |
|
| Projection Weld Nuts |
 |
Types: AWN, AWNS
PEM Series: WN, WNS
General Information: Prevents burnouts and eliminates the need for indexing and retapping to remove weld spatter. Thread sizes #4 to 1/4" and M3 to M6.
Data Sheet
|
|
| |
| < Page 2 |
| |
|
|
